Home · Products · PURITY FG

Food Grade Lubricants

PURITY™ FG

NSF H1 registered food-grade lubricants for food & beverage processing — clean, odourless, safe for incidental contact. Halal-certified and Kosher-certified. Covers greases (400g/17kg) and fluids (20L/205L).

food gradehalalkosher

Product Specifications

PURITY FG Grease — FG00

Application: Sleeve & anti-friction bearings, slides and guides in cold-storage areas

PropertyTypical Value
NLGI Grade00
Grease TypeAluminum Complex
Penetration, Unworked / Worked 60 strokes / Worked 10,000 strokesASTM D217446 / 420 / 421
Dropping Point (°C / °F)ASTM D2265211 / 412
Water Washout, % loss @ 79°CASTM D12644.5
Four Ball Weld (kg)ASTM D2596620
Four Ball Wear, scar diam (mm)ASTM D22660.53
Copper CorrosionASTM D40481A
Base Oil Viscosity, cSt @ 40°C / 100°CASTM D445182 / 17
Operating Temperature Range-35°C ~ 120°C

Specifications are indicative — refer to the official Petro-Canada product data sheet for full details.

Grades & Pack Sizes

Tap Add to quote to build your request list — no payment online.

PURITY FG GreaseNSF H1

FG00

Softest grade — pumpable down to -35°C, ideal for centralized lube systems in cold storage areas.

FG1

NLGI 1 — softer than FG2, used in can seamers for the beverage industry.

FG2

Standard NLGI 2 multi-purpose grease — the general-duty default across most food plant bearings.

FG2 Clear

Colourless version of FG2 — for beverage canning/bottling lines where any staining is unacceptable.

FG2 Multi Purpose

Calcium-sulfonate complex with added EP protection — for high loads such as animal-feed pellet mill bearings.

FG2 Extreme

High-viscosity semi-synthetic for heavily loaded, low-to-medium speed bearings — pellet mills, rotary cookers.

FG2 Microl Max

FG2 with MICROL antimicrobial protection — inhibits odour- and degradation-causing microbes.

FG2 Synthetic

Calcium sulfonate/carbonate synthetic — widest temperature range (-40°C to 200°C) of the FG2 line.

FG2 Synthetic Heavy 220

Tackified, heavier-bodied synthetic grease — stays in place under the most demanding loads.

PURITY FG AW Hydraulic FluidNSF H1 · ISO 21469

ISO 32

Lower-viscosity grade — passes ISO 6743-4 HV & ISO 11158, FZG >12; meets JBT Avure HPP machine requirements.

ISO 46

Most common grade — ideal for general hydraulic circuits and air-line lubricators in food packaging lines.

ISO 68

Mid-high viscosity grade for warmer-running hydraulic systems and pump designs needing extra film strength.

ISO 100

Highest-viscosity AW grade — for heavily loaded pumps and wide operating pressure ranges.

PURITY FG-X AW Hydraulic FluidNSF H1 · ISO 21469

ISO 46

SynFX-formulated for synthetic-like performance — roughly 44% longer oxidation life (RPVOT) than standard AW 46.

PURITY FG EP Gear FluidNSF H1 · ISO 21469

ISO 100

SynFX-formulated EP gear fluid — lowest viscosity grade of the range.

ISO 150

SynFX-formulated EP gear fluid for moderate loads and shock-loading conditions.

ISO 220

SynFX-formulated EP gear fluid — common mid-range grade for enclosed gear drives under shock loading.

ISO 320

SynFX-formulated EP gear fluid — heavy-duty grade for high-load enclosed gear drives.

PURITY FG PAG Gear FluidNSF H1

ISO 150

PAG-based synthetic gear oil — high viscosity index, 2x oxidation resistance (RPVOT) vs. competing products.

ISO 220

PAG-based synthetic gear oil — mid-range grade for most industrial worm-gear applications.

ISO 460

Highest-viscosity PAG grade — for heavily loaded worm gears running hot.

PURITY FG Synthetic EP Gear FluidNSF H1 · ISO 21469

ISO 220

PAO-based synthetic EP gear fluid — operating range -35°C to 121°C, strong wear & load protection.

ISO 460

PAO-based synthetic EP gear fluid — highest viscosity grade for heavy, slow-speed gearing.

PURITY FG Compressor FluidNSF H1 · ISO 21469

ISO 46

SynFX-formulated — for oil-flooded rotary screw compressors, up to 4,000 hrs service life below 85°C discharge.

ISO 100

SynFX-formulated — for rotary vane & reciprocating compressors per OEM guidelines.

PURITY FG HTF / Heat Transfer FluidNSF HT1 · ISO 21469

PURITY FG HTF / Heat Transfer Fluid

Non-pressurized closed-loop heat transfer fluid — operates up to 326°C (620°F), outstanding thermal & oxidative stability.

PURITY FG Synthetic FluidNSF H1

ISO 46

PAO-based — HUSKY HS207 approved for injection molding (up to 8,000 hrs); also used in Hiperbaric HPP equipment.

ISO 100

PAO-based — for vane compressors, vacuum pumps and lightly loaded gearboxes needing a higher-viscosity fluid.

PURITY FG WO White OilNSF 3H · ISO 21469

ISO 10

NSF 3H white mineral oil — ISO 10, safe for incidental and direct food contact (rust prevention, release agent, dust suppressant).

ISO 15

NSF 3H white mineral oil — ISO 15, safe for incidental and direct food contact (rust prevention, release agent, dust suppressant).

ISO 35

NSF 3H white mineral oil — ISO 35, safe for incidental and direct food contact (rust prevention, release agent, dust suppressant).

ISO 40

NSF 3H white mineral oil — ISO 40, safe for incidental and direct food contact (rust prevention, release agent, dust suppressant).

ISO 68

NSF 3H white mineral oil — ISO 68, safe for incidental and direct food contact (rust prevention, release agent, dust suppressant).

ISO 90

NSF 3H white mineral oil — ISO 90, safe for incidental and direct food contact (rust prevention, release agent, dust suppressant).

PURITY FG Trolley FluidNSF H1 · ISO 21469

PURITY FG Trolley Fluid

Tackified, tasteless, odourless fluid for hook & trolley systems in meat processing — resists drips and water washout.

PURITY FG Chain FluidNSF H1 · ISO 21469

Light

Lower-viscosity chain fluid — strong adherence, resists water washout and spray loss.

Heavy

Higher-viscosity chain fluid for heavier loads — same strong tack and rust protection as Light grade.

PURITY FG Seamer-E FluidNSF H1 · ISO 21469

PURITY FG Seamer-E Fluid

Formulated for canning seamer lubrication — compatible with Pneumatic Scale Angelus™ machine models.

PURITY FG Corrcut-E Fluid 15NSF H1

PURITY FG Corrcut-E Fluid 15

Improves slitter/scorer blade life via excellent starch removal — for corrugated-box slitter/scorer systems.

PURITY FG Synthetic Barrier FluidNSF H1

ISO 5

Very low viscosity PAO barrier fluid — optimal for seal-face cooling where process fluid stays below 204°C.

ISO 32

Higher viscosity PAO barrier fluid — use once process fluid temperature rises above 204°C, to keep vapour pressure low.

Not sure which grade? We'll advise you.

Request A Quote