Application: Multi-application calcium sulphonate complex grease for high-temperature and wet/marine conditions across general manufacturing, pulp and paper, fleet, forestry and power generation. Suited to continuous service up to about 200°C/392°F and to wheel bearings, chassis, sealed-for-life bearings, CV joints, ovens and kilns.
| Property | Typical Value |
|---|---|
| NLGI GradeASTM D217 | 2 |
| NLGI Classification | GC-LB |
| ColourPCM 264 | Burgundy |
| TexturePCM 264 | Buttery / Smooth |
| Dropping Point, °C / °FASTM D2265 | 314 / 597 |
| Worked Penetration, 60 strokesASTM D217A | 284 |
| Oxidation Stability, 100 hrs, psi dropASTM D942 | 2.2 |
| Base Oil Viscosity, cSt @ 40°C / SUS @ 100°FASTM D445 | 100 / 523 |
| Base Oil Viscosity, cSt @ 100°C / SUS @ 210°FASTM D445 | 10.8 / 63 |
| Grease Viscosity with Polymer, cSt @ 40°C | 214 |
| Grease Viscosity with Polymer, cSt @ 100°C | 22 |
| Timken OK Load, kg / lbASTM D2509 | 27 / 60 |
| Four-Ball Weld Point, kgASTM D2596 | 500 |
| Four-Ball Wear Scar Diameter, mmASTM D2266 | 0.45 |
| Copper CorrosionASTM D4048 | 1b |
| Water Washout, % @ 79°C / 174°FASTM D1264 | 1.5 |
| Temperature Range, °C / °F | -20 to 200 / -4 to 392 |
Specifications are indicative — refer to the official Petro-Canada product data sheet for full details.
NLGI GC-LB classified. Source: IM-8021E (2015.03). An earlier revision (05.11) of the same document shows minor differences for this grade (base-oil viscosity @40°C 95 cSt, copper corrosion 1a) — normal batch-to-batch variation, reported here for transparency rather than reconciled.