Home · Products · INNOVATE

Data Centre Cooling Fluids

INNOVATE™

Faster. Cooler. Cleaner. — HF Sinclair's range of data centre cooling fluids for AI, GPU and HPC workloads: DTC25 direct-to-chip coolant, plus the GARDA, PEYTO and YARRA single-phase immersion fluids.

new

Product Specifications

Direct-To-Chip Cooling Fluid — DTC25

Application: Cold-plate loops and CDUs

PropertyTypical Value
ColorFluorescent Blue
Propylene Glycol Concentration (wt%)ASTM D332125–28
Freeze Point (°F / °C)ASTM D33219 (−13)
Density, 15°C (kg/m³)ASTM D40521,030
pHASTM D12878.0 – 8.8
Corrosion SpecificationsASTM D1384 & Modified D8040 per OCP SpecMeets specifications
Thermal Conductivity @ 50°C (W/m·K)ASTM D78960.491
Specific Heat Capacity @ 50°C (J/kg·K)ASTM E12693650
Kinematic Viscosity @ 40°C (cSt)ASTM D4451.428
Boiling Point (°C at 760 mmHg)ASTM D1120102.2
Electrical Conductivity (µS/cm)ASTM D1125> 2000
Foaming TendencyASTM D1881< 150 mL, < 5 sec break time
Sulfate (ppm)ASTM D5827< 10
Chloride (ppm)ASTM D5827< 5
Total Hardness (ppm as CaCO3)ASTM D6130< 20

Refer to the official Petro-Canada product data sheet for full details.

DTC25 is a glycol coolant for direct-to-chip loops only — not for immersion.

The INNOVATE™ Range

Tap Add to quote to build your request list — no payment online.

Direct-To-Chip Cooling Fluid

DTC25

Pre-mixed, ready-to-use PG25 glycol coolant for direct-to-chip cold-plate loops, formulated to meet the OCP PG25 Base Specification.

Immersion Cooling Fluid

GARDA

High-performance product that meets the requirements of the Open Compute Project (OCP).

PEYTO

Optimal thermal management delivering exceptional heat transfer.

YARRA

Outstanding thermal management through a balanced physical profile.

Not sure which fluid fits your setup? We'll advise you.

Request A Quote