Application: Trucks, buses, construction & off-highway diesel engines; also suitable for stationary & marine diesel systems
| Property | Typical Value |
|---|---|
| Flash Point, COC (°C)ASTM D92 | 228 |
| Kinematic Viscosity, cSt @ 40°C / 100°CASTM D445 | 118 / 15.6 |
| Viscosity IndexASTM D2270 | 139 |
| High Temp/High Shear Viscosity, cP @ 150°CASTM D4683 | 4.1 |
| Cold Cranking Viscosity, cP @ °CASTM D5293 | 5540 @ -20 |
| Pour Point (°C)ASTM D5950 | -36 |
| Borderline Pumping Viscosity, cP @ °CASTM D4684 | 21350 @ -25 |
| Sulphated Ash, % wtASTM D874 | 1.0 |
| Base No. (BN), mg KOH/gASTM D2896 | 9.8 |
Specifications are indicative — refer to the official Petro-Canada product data sheet for full details.
Exceeds ACEA standards and approved for API CK-4 — dependable cold start-up and exceptional shear stability for severe service.
Super High Performance synthetic blend — up to 1% fuel economy improvement and extended drain capability.
Synthetic base oil blend with high-performance additives — exceeds ACEA standards, approved for API CK-4.
Formulated for extreme cold service operations — reduced wear through ease of start-up is the ultimate priority.
Formulated for extreme cold service operations with top performance additives and high quality synthetic base oils.
Ultra High Performance full synthetic — excellent protection especially in low temperature environments.
Ultra High Performance synthetic all-weather oil — 99.9% pure base oils, outstanding engine wear control.
Ultra High Performance low SAPS, low viscosity synthetic — designed to outperform ACEA E8 (and E7, E11) requirements.
Ultra High Performance synthetic engineered to outperform ACEA E8, protecting engines in severe conditions with a full suite of OEM approvals.
Licensed API CH-4/SJ — for diesel-powered engines in smaller vehicles, including cars and light trucks requiring CH-4, CG-4 or earlier specs.
Suitable for diesel-powered cars and light trucks where this viscosity grade and CH-4, CG-4 or earlier specifications are required.
SAE 10W monograde — API CF (10W) / CF-2, CF or CF/SJ back-serviceable to CD-II, CD, SH, SG and earlier. Suitable for Caterpillar TO-2 and Allison C-4 transmissions/torque converters.
SAE SAE 30 monograde — API CF (10W) / CF-2, CF or CF/SJ back-serviceable to CD-II, CD, SH, SG and earlier. Suitable for Caterpillar TO-2 and Allison C-4 transmissions/torque converters.
SAE SAE 40 monograde — API CF (10W) / CF-2, CF or CF/SJ back-serviceable to CD-II, CD, SH, SG and earlier. Suitable for Caterpillar TO-2 and Allison C-4 transmissions/torque converters.
SAE SAE 50 monograde — API CF (10W) / CF-2, CF or CF/SJ back-serviceable to CD-II, CD, SH, SG and earlier. Suitable for Caterpillar TO-2 and Allison C-4 transmissions/torque converters.
API CJ-4/SN licensed — fully back serviceable to CI-4, CH-4 and earlier categories, with demonstrated extended drain capabilities.
Offers advanced soot control — suitable where an API CJ-4 lubricant of this viscosity grade is specified.
Natural gas mobile engine oil for mixed CNG/LNG, diesel & gasoline fleets — extended drain capability, Cummins CES 20092 approved.
Natural gas mobile engine oil for mixed CNG/LNG, diesel & gasoline fleets — extended drain capability, Cummins CES 20092 approved.